3D printing Slicing Needs app Slices an STL, 3MF or OBJ to G-code with OrcaSlicer from your own printer, process and filament presets, checks the result and hands it to Bambu Connect or your printer's own app. @earthtojake MIT

Skill · Slicing

3D printing

Slices an STL, 3MF or OBJ to G-code with OrcaSlicer from your own printer, process and filament presets, checks the result and hands it to Bambu Connect or your printer's own app.

Author
earthtojake (community)
Source
earthtojake/text-to-cad at version 048f763
Licence
MIT
Needs
Needs an app or CLI: OrcaSlicer; cad command from text-to-cad (installed with uv); Bambu Connect or Bambu Studio, only for Bambu Lab printers
Works in
Terminal agents such as Claude Code, Codex and Cursor
Reviewed
Nov 2026, skill file read in full
Note
Never starts a print and never contacts a printer: you press Print in the printer's app. Presets come from your OrcaSlicer setup; OrcaSlicer 2.5 and later hides its built-in ones from this route. The cad tool sends usage stats by default.

Install only this skill

npx skills add earthtojake/text-to-cad@048f763bbbed149d2217c6119c5279ef85e5370e --skill print3d -g -y

Comes in these collections