Device
Deck No. 11 · Project
Smart-Home Device
One board, one sensor, one printed case, showing up in Home Assistant.
A single home-made device, such as a sensor or a relay on an ESP32 or Arduino board: wiring checked before power, firmware compiled and flashed from the terminal, automations in Home Assistant, and a case designed and sliced for your own printer.
npx skills add wedsamuel1230/embedded-engineering-skills@869710ec3b9a40a4f14615b68ca1f1d3dfc88323 --skill wiring-safety-check arduino-cli-skill -g -y && \ npx skills add homeassistant-ai/skills@166defa51c606b3c77d45a9b29a459d1f993f357 --skill home-assistant-best-practices -g -y && \ npx skills add earthtojake/text-to-cad@048f763bbbed149d2217c6119c5279ef85e5370e --skill cad print3d -g -y
npx skills add wedsamuel1230/embedded-engineering-skills@869710ec3b9a40a4f14615b68ca1f1d3dfc88323 --skill wiring-safety-check arduino-cli-skill -g -y npx skills add homeassistant-ai/skills@166defa51c606b3c77d45a9b29a459d1f993f357 --skill home-assistant-best-practices -g -y npx skills add earthtojake/text-to-cad@048f763bbbed149d2217c6119c5279ef85e5370e --skill cad print3d -g -y
Fetches 5 skills from 3 author repos, each pinned to the version we reviewed. Nothing is mirrored. Uses the open-source skills CLI; needs Node.js 22.20 or newer.
Opens Claude Code with the install prompt already typed. Nothing runs until you press Enter.
Skills installed from a terminal do not reach claude.ai. A one-step route for claude.ai is in the works.
Until then you can add skills one at a time: open a card below, follow the link to the author's repo, and upload that skill folder as a ZIP under Customize, then Skills.
What's inside
5 skills. Each card links to its author's repository at the exact version we reviewed.
- Wiring safety check 1/5 Electronics Ready Checks a microcontroller circuit before power is applied: rails and grounds, logic levels in both directions, current budget, pull-ups, drivers for motors and relays, safe states. @wedsamuel1230 MIT Source wedsamuel1230/embedded-engineering-skills at 869710e
Wiring safety check
Before power. It maps rails and grounds, checks logic levels in both directions and flags a 5 V signal into a 3.3 V pin, then waits for your multimeter readings.
- Arduino CLI 2/5 Firmware build Needs app Gives the agent Arduino CLI commands for board discovery, cores and libraries, compile and upload, with serial port help for each operating system and a list of common mistakes. @wedsamuel1230 MIT Source wedsamuel1230/embedded-engineering-skills at 869710e
Arduino CLI
Finds the board and its port, then compiles and uploads the sketch from the terminal. A clean upload counts as proof of the upload, not of a working device.
- Home Assistant best practices 3/5 Home automation Ready Steers Home Assistant work to native triggers, conditions and helpers before templates, picks the automation mode, prefers entity ids and plans renames, backups and upgrades. @homeassistant-ai MIT Source homeassistant-ai/skills at 166defa
Home Assistant best practices
Once the device reports, this writes the automations around it with native triggers and helpers, and plans entity renames so that dashboards do not break.
- text-to-cad 4/5 Official Parametric CAD Needs app Writes parts and assemblies as Python build123d scripts, builds them in a local server with a live viewer, checks them for printing or machining and exports STEP, STL, 3MF or GLB. @earthtojake MIT Source earthtojake/text-to-cad at 048f763
text-to-cad
The case as a parametric model. Board dimensions go in, a Python script comes out, you watch it in a live 3D view, and a part you ask to be 3D printed is checked for that process.
- 3D printing 5/5 Slicing Needs app Slices an STL, 3MF or OBJ to G-code with OrcaSlicer from your own printer, process and filament presets, checks the result and hands it to Bambu Connect or your printer's own app. @earthtojake MIT Source earthtojake/text-to-cad at 048f763
3D printing
Slices the case with your own OrcaSlicer presets and hands the file to the printer's app. It never starts a print.
Good to know
What you bring
- A multimeter for the continuity and rail measurements it asks for
- Arduino CLI (arduino-cli)
- A board on a USB port for uploads
- Optional: a tool that reaches your Home Assistant API, such as an MCP server
- uv (the agent installs the cad command with it if cad is missing)
- A browser for the local model viewer
- OrcaSlicer
- cad command from text-to-cad (installed with uv)
- Bambu Connect or Bambu Studio, only for Bambu Lab printers
Pick one, not both
- ESPHome: most Home Assistant devices run ESPHome, and this deck has no card for it. If that is your route, leave out arduino-cli-skill and flash with ESPHome's own tools.
- Home Assistant link: no card writes the code that announces the device to Home Assistant, for example over MQTT. Ask your agent for it and check the result against the current Home Assistant documentation.
- Whole plugin: cad and print3d belong to the text-to-cad plugin, which also has skills for drawings, renders and circuit boards. Install the plugin or the two skills, not both.
- Telemetry: the cad tool behind both text-to-cad skills sends usage stats and crash reports unless you turn that off, as its privacy policy describes.
- Embedded set: wiring-safety-check and arduino-cli-skill come from a set of 43 skills with a router skill in front. The router reads files outside its own folder, so it is left out here. Install the whole set as a plugin if you want its routing.
- Mains voltage: wiring-safety-check is written for low-voltage boards. A relay that switches mains power needs a qualified person, whatever a skill says.
- Every skill file read in full
- Pinned to a reviewed version
- Author and licence on every card
- Requirements and costs disclosed
- No sponsored skills inside
Nov 2026Reviewed